PVC Vinyl Siding Panel Extrusion Machine Line

• Type: Sheet Extruder
• Plastic Processed: PVC ASA PMMA
• Product Type: Extrusion Molding Machine
• Model NO.: 65|132, 55|110, SJ-45/30
• Feeding Mode: One Feed
• Assembly Structure: Integral Type Extruder
• Screw: Single Screw and Double Screw
• Engagement System: Full Intermeshing
• Screw Channel Structure: Deep Screw
• Exhaust: Exhaust
• Automation: Automatic
• Computerized: Computerized
• Warranty: 1year
• Sheet Layer: One Layer or Double Layer
• Delivery Conditions: Fob CIF CIP
• Processing Period: 40 Days
• Delivery Period: 30days
• After-Sales Service: Send Engineers Install and Test Machine
• Power Condition: According to Customer Requirements
• Line Diamision: 30m*3*3m
• Electrical Element: ABB, Siemense, Shneider, Rkc, Omron
• Output: 100-250kg|H
• Transport Package: Stretch Film and Wooden Pallet, Wooden Packing
• Specification: Max. Product Width 400mm, thickness
• Trademark: Sincere Machinery
• Origin: Qingdao, China
• HS Code: 8477209000
• Production Capacity: 50 Sets\Year

Product Description

PVC vinyl Siding Panel Extrusion Machine Line.
PVC Exterior Siding Panel Making Machine.

1. PVC wall Siding Panel Application :

1.1.PVC vinyl Siding panel is applied in house, office building, villa, and wall protection.Due to it`s top layer covered with PVC, ASA, or PMMA, it can be used in hot, cold dry or wet place, can bear long time sun light, wind, rain and bad weather.

1.2.This line can be equipped with different pattern rollers, easily changeable.Punch on-line, it is more economical way.

1.3 PVC vinyl siding is mainly produced by rigid PVC.Used for building external wall;Not only protect the wall, but alsobeautiful as decoration.It make the wall looks like wood board, looks simple and natural, but no need consume wood.

1.4 PVC vinyl siding can be recycled, producing cost is lower than cement and ceramic tile.It's green buliding materials, good or environmental protection.
PVC vinyl siding can be installed easily, can be combined with each kind of structural wall, not affected by seasons, easy clean(can be washed by water);No need maintain (without paint and coating);Fireproof, moisture resistance, corrosion resistance, aging resistance.


2. PVC decorative outside wall panel production line process as following : 
Feeder → Mixer → Feeder → Extruder → Extruder Mould →Two roller calender with Embossing →
Vacuum tank → Haul-off → punch → Cutting → Stacker→ Waste recycling machine (Crusher, Milling machine).
Printer, Water chiller and air compressor and so on.

3. PVC decorative outside wall panel production line is composed as following 
1. Powder feeder.
2. Conic double screw extruder for PVC (SJSZ-55|110 or 65|132),
   Single screw extruder for protective layer ASA |PMMA (SJ-45|30).
3. Extrusion mould, and calibrators.
4. Embossing machine.
5. Vacuum bath / vacuum tank. 
6. Haul-off Unit. 
7.Punch machine.
8. Cutting machine / Cutter.
9. Stacker. 
10. Auxiliary machines:
     SHR-200/500 or SHR-300/600mixer for PVC Powder.
     SWP-360 SWP-400 plastic crusher.
     SMP-500 Milling Machine.

4. Applicable raw materials: PVC, ASA, PMMA

5. Production speed: 0-8m/min, or 0-20m/min

6. Machinery electric parts details:

 

Temperatue meter	Omron or RKC
Contactor	Schneider
Relay	Schneider
Transducer	Holip
Power light, button	Schneider
Inveter	ABB
Low voltage electrical appliances	Siemense

7. Contact:
Ekaterina  
 
 
[email protected]